0826-1X1T-06-F With LED 100M Ethernet Lengthen RJ-45 Female Connector
0826-1X1T-06-F With LED 100M Ethernet Lengthen RJ-45 Female Connector
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks With Magnetics | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 1×1 |
| Applications Speed | 10/100 Base-T, AutoMDIX |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 0.537″ (13.65mm) |
| LED Color | With LED |
| Shielding | Shielded, EMI Finger |
| Features | Board Guide |
| Tab Direction | UP |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
The design principle of RJ connector
The RJ connector is composed of a plug and a socket. The connector composed of these two components is connected between the wires to realize the electrical continuity of the wires. When designing the signal integrity of the RJ connector, the following three principles need to be considered:
1. Crosstalk between the pins of the RJ connector;
2. Connectivity with the impedance of the entire interconnected transmission line;
3. If there is a timing request, consider the delay on the RJ connector.
Write your message here and send it to us
