2-1734473-1 Without LED Cat5 LAN JACK 2×8 Port Ethernet RJ45 Connector
2-1734473-1 Without LED Cat5 LAN JACK 2×8 Port Ethernet RJ45 Connector
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 2×8 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 27.31 mm |
| LED Color | Without LED |
| Shielding | Shielded, EMI Finger |
| Features | Board Guide |
| Tab Direction | UP & Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
Connector function application: signal transmission
Signal transmission can be divided into two categories: simulation signal transmission and digital signal transmission. Regardless of the analog or digital signal RJ connector, its required function should be able to protect the integrity of the transmitted voltage pulse signal, the integrity should include the waveform of the pulse signal and its amplitude. The pulse frequency of the data signal is different from the simulation signal. The pulse transmission speed determines the frequency of the protected pulse. The transmission speed of the data pulse is much faster than some typical simulation signals. Some pulses are in the RJ connector. The transmission speed has been close to the one-hundred-billionth of a second. In today’s microelectronics technology, the RJ connector is generally regarded as a wire, because the wavelength associated with such a fast-growing frequency can be compared to the RJ connection The standard of the device.
When the RJ connector or interconnection system such as a cable installation is used in high-speed data signal transmission, the corresponding description of the function of the RJ connector also changes. The characteristic impedance instead of the resistance and the crosstalk in the interconnection system have become especially important. Controlling the characteristic impedance of the RJ connector has become a major trend of consciousness, and crosstalk is controlled in the cable. The characteristic impedance has such a primary orientation in the RJ connector, because the geometric shape of the resistance is difficult to be completely consistent, and the RJ connector standard is very small, it is necessary to minimize the possibility of crosstalk. In the cable, the control of the geometric shape is easier to complete, and its characteristic impedance is also easy to control, but the length of the cable may cause potential crosstalk.
