6116314-1 Without Magnetics 8P8C Modular Fast Jack Stacked 2×6 RJ45 Connectors
6116314-1 Without Magnetics 8P8C Modular Fast Jack Stacked 2×6 RJ45 Connectors
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 2×6 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 27.31 mm |
| LED Color | With LED |
| Shielding | Shielded, EMI Finger |
| Features | Board Guide |
| Tab Direction | UP & Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
The RJ network interface layer is not actually part of the Internet protocol suite, but it is a way to transmit data packets from the network layer of one device to the network layer of another device. This process can be controlled in the software driver of the network card, and also It can be controlled in firmware or licensed dedicated chip. This will perfectly increase the data link function of preparing the header to be sent and sending through the physical pre-language practice. On the other end, the link layer will complete the data frame acceptance, remove the header and will receive it. The packets are passed to the network layer.
Write your message here and send it to us
