China 615016137721 Modular Connectors / Ethernet Connectors WR-COM Modular Jack RJ45 Horztl 1×2 Dual port factory and manufacturers

615016137721 Modular Connectors / Ethernet Connectors WR-COM Modular Jack RJ45 Horztl 1×2 Dual port

Number of Ports: 1X2

Speed: RJ45 Without Magnetics

Application-Lan : NoN PoE

Latch: UP

LED: With LED

Orientation : 90°Angle (Right)

Compatible Brand : Wurth

Mounting Type: Through Hole

Shielding: Shielded, EMI Finger

Temperature: ﹣40 TO ﹢85

Product Length (mm): 15.70

Product Height (mm): 13.50

Product Width (mm): 32.20

Part Number:615016137721

Send email to us

Product Detail

Contact Us

Product Tags

Similar Part No

HCJT2-802SK-L11 8P/8C Shielded Dual Port Tab-Up Ethernet RJ45 Connectors

Categories	Connectors, Interconnects
Categories	Modular Connectors - Jacks
Application-LAN	ETHERNET(NoN POE)
Connector Type	RJ45
Number of Positions/Contacts	8p8c
Number of Ports	1×2
Applications Speed	RJ45 Without Magnetics
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Height Above Board	13.40 mm
LED Color	With LED
Shielding	Shielded, EMI Finger
Features	Board Guide
Tab Direction	UP
Contact Material	Phosphor Bronze
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Contact Material Plating Thickness	Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material	Brass
Housing Material	Thermoplastic
RoHS Compliant	YES-RoHS-5 WIth Lead in Solder Exemption

Mechanical performance As far as the connection function is concerned, the insertion force is an important mechanical performance. Insertion force is divided into insertion force and extraction force (extraction force is also called separation force), and the requirements of the two are different. There are regulations on insertion force and small separation force in the relevant standards, which indicates that from the point of view of use, the insertion force is small (there is a structure with low insertion force LIF, but insertion force ZIF does not). If the separation force is too small, it will affect the reliability of the contact. The insertion force and mechanical life of the connector are related to the structure of the contact part (positive pressure), the coating quality of the contact part (coefficient of sliding friction) and the dimensional accuracy (alignment) of the contact device.

Previous: 6116353-8 1×2 Jack Modular Connector 8p8c (RJ45, Ethernet) 90° Angle (Right) Shielded, EMI Finger Cat5

Next: RJHSE-X380-02 Without LED Modular Jack 1X2 Dual Port 8P8C Ethernet RJ45 Connector