615016245421 Shielded With LED Ethernet Jack 2×1 RJ45 Connector
615016245421 Shielded With LED Ethernet Jack 2×1 RJ45 Connector
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 2×1 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 25.4 mm |
| LED Color | With LED |
| Shielding | Shielded, EMI Finger |
| Features | Board Guide |
| Tab Direction | UP & Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
Many people are doing RJ heads, just to ensure that the order of the two ends of the line is one-to-one, but they do not follow the 568A/568B wiring specifications. Although it can connect to the network in this way, the anti-interference of the line is very poor, and there are often conditions such as slow transmission speed and good times and bad times in the network. We hope that we must follow the specifications when making the network cable, and the length of the network cable is recommended to be no less than 1.5 meters based on practical engineering experience, which is very necessary to improve the stability of the network.
Write your message here and send it to us
