HCJ26-802SK-L11 Multi-Port Magnetic Ethernet RJ-45 Connectors 2X6
HCJ26-802SK-L11 Multi-Port Magnetic Ethernet RJ-45 Connectors 2X6
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 2×6 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 25.40 mm |
| LED Color | With LED |
| Shielding | Shielded, EMI Finger |
| Features | Board Guide |
| Tab Direction | UP & Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
The RJ network link layer is not often so simple. It may also be a virtual private network (VPN) or tunnel, where packets from the network layer are sent using tunnel protocols and other (perhaps the same) protocol suites instead of sending To the physical interface. VPNs and tunnels are usually pre-built, and they have some special features that are not directly sent to the physical interface (for example, it can encrypt the data passing through it). Because the link “layer” is now a perfect In the network, the recursive use of this protocol suite may cause turbidity. But it is an excellent way to complete the more common and messy functions. (Although you need to pay attention to prevent a packet that has been encapsulated and sent through the tunnel is re-encapsulated And send).
