probanner

products

ZE15612NN 180 Degree Without Filter Modular Jack Vertical RJ45 Connector 1X2

  • Number of Ports: 1X2
  • Speed: RJ45 Without Magnetics
  • Application-Lan : NoN PoE
  • Latch: UP
  • LED: Without LED
  • Orientation : Vertical
  • Compatible Brand : ZhuSun
  • Mounting Type: Through Hole
  • Shielding: Shielded
  • Temperature: ﹣40 TO ﹢85
  • Product Length (mm): 15.60
  • Product Height (mm): 16.50
  • Product Width (mm): 28.50

  • Part Number:ZE15612NN
  • Product Detail

    Contact Us

    Product Tags

    Similar Part No

    ZE15612NN 180 Degree Without Filter Modular Jack Vertical RJ45 Connector 1X2

    180 Degree 1x2 RJ45

    Categories  Connectors, Interconnects
     Modular Connectors - Jacks
    Application-LAN  ETHERNET(NoN POE)
    Connector Type  RJ45
    Number of Positions/Contacts  8p8c
    Number of Ports  1×2
    Applications Speed  RJ45 Without Magnetics
    Mounting Type  Through Hole
    Orientation  180°
    Termination  Solder
    Height Above Board  16.50 mm
    LED Color  Without LED
    Shielding  Shielded
    Features  Board Guide
    Tab Direction  UP
    Contact Material  Phosphor Bronze
    Packaging  Tray
    Operating Temperature  -40°C ~ 85°C
    Contact Material Plating Thickness  Gold 6.00µin/15.00µin/30.00µin/50.00µin
    Shield Material  Brass
    Housing Material  Thermoplastic
    RoHS Compliant  YES-RoHS-5 WIth Lead in Solder Exemption

     

    At present, the types of network cables are mainly super 5 types. Generally speaking, related panels and modules and other accessories will be configured. You must understand clearly in advance before wiring. At the same time, this type of network cable is generally suitable for 100M networks. If you need to use a gigabit network in your home, you need to use Category 6 network cables. The wiring system between the two is still quite different, and you must pay attention to details in the wiring, and Category 6 is more difficult in construction than Category 5.
    It must not be treated carelessly during the laying-off process. It is necessary to control its strength. There is no way for one person to operate it. Under normal circumstances, two staff must be deployed, one for laying-off, and one for drawing. In the case of being able to maintain consistency, this can avoid the problem of multi-wire winding.

     

     


  • Previous:
  • Next:

  • Write your message here and send it to us